Can Quartz Watches Be Repaired? Explained With Instructions

Have you ever been in a situation when your ticker suddenly stopped working and left you with a defective device? At this point, the million-dollar question would be “Can quartz watches be repaired?” To find out the answer, stick to today’s article.


What Are Quartz Watches?

As the name suggests, the quartz wristwatch uses quartz crystals that oscillate at a specific frequency to tell time. As a result, quartz timepieces are generally more precise and self-sustaining for at least a year or longer than mechanical models.

If you want to know how the quartz differs, you have to know how it functions. Quartz belongs to the “Piezoelectric” family of minerals. In other words, if you put them under pressure, they will emit an amount of energy, and if you bring power to them, they will begin vibrating. 

Because of the crystal’s particular tuning-fork design and the level of power it receives from the microprocessor, the crystal vibrates precisely 32,768 times each sec, or at a ratio of 32.768KHz.

As a result of this movement (referred to as oscillation), the crystal oscillator sends an electrical pulse every second, on the penultimate frequency of 32,768.

This pulse then passes via the tiny incremental mechanism, transforming the electrical input into mechanical energy, driving the timepiece movements!

As they employ an incremental electrical setup with accurate oscillations, quartz watches can tell time with the maximum degree of precision.

Can Quartz Watch Be Repaired?

Even though people praise quartz watches for their remarkable precision, they are the same as any conventional timepiece and will ultimately go wrong at some points.


Yet, compared to their mechanical rivals, quartz models are way more effortless to tackle, and even when you find no other way to deal with the broken parts, you can still replace those specific components. And the best thing is doing so doesn’t cost you a fortune.

Why Do Quartz Watches Stop Working?

The Empty Battery make Movement Stop

A dead battery is the most prevalent cause of quartz timepieces not operating. Although not all high-quality devices utilize batteries, these batteries should endure at least two years when they do. 

There are several factors to consider for an extended lifespan of a battery, just as there are for vehicles or any other mechanical component.


Here are a few things that might shorten the longevity of the battery:

  • Whether or not the wristwatch is digital.
  • The battery’s size.
  • Your device’s functionalities – and how frequently do you utilize them.
  • Chronograph function usage frequency. 
  • Extended exposure to high heat.

Initially, a watch repair expert will examine whether your device’s battery is OK or not and whether the connections between the timepiece and the battery are still in good condition.

Even though this is the most typical cause, we do not recommend substituting the battery yourself. Watches can cause dysfunction for various reasons, and discarding the battery could impair your device’s remaining functions.

Water Damage

Yes, a little raindrop inside the timepiece may entirely change how it functions. 

After a matter of seconds, the device mechanisms will cease running due to corrosion. And unfortunately, these mechanisms and a few components will not be able to get fixed. Thus, you must replace them all.

When this happens, it’s usually because the device’s locks have failed, but sometimes, exposure to humidity or moisture could also be the culprit.

Physical Damage 

You might foresee significant physical damage to your timepieces if you overuse them daily and for virtually everything.

Everything from regular work tasks that cause something within the piece to get unfastened or damaged due to the continuous action of unintentionally dropping your wristwatch and breaking the inner axles or cogs is possible.

Even when you take it to jewelers, in some cases, they still have to send the broken device back to the maker, based on their severity.

Poor Manufacturing

There are many small mechanisms and components in a premium timepiece if you have ever opened one up to examine what’s inside. As a result, since there are so many delicate elements, the factory might misalign the sections. Although the possibility is super slim, it’s still possible.

Once this occurs, the tiny components may get disconnected or shifted, leaving the timepiece to cease to function. A quick visit back to the factory may be all that is necessary to resolve this issue.

High Electrical Currents make stop movement

If you’ve ever searched “Why does my wristwatch stop functioning?” on Google, you’ll notice that you run into many obscure-sounding cases of individuals who are sure that they can’t utilize timepieces since any device they put on dies quickly.


Uncommonly, you may find yourself trying to wear a wristwatch and noticing that it simply stops running. Intense electrical impulses in the body are responsible for this strange occurrence, notwithstanding how bizarre it may appear.

Because of electrical fluxes running through the body or if you’ve previously been subjected to electricity, your device’s battery longevity and functionality might get affected by these factors.

In this case, there would be nothing you can do.


Now you know the honest answer to the question at the beginning of this article, including frequent causes of a defective one, and possible solutions to handle in specific cases. Hopefully, today’s post has been of much help. Don’t forget to revisit us for more valuable tips and knowledge.

Further Reading:

Last Updated on October 6, 2021 by The o.d.m team